NPW400C(喷水织机用)

技术参数：
织机门幅：150Cm-360cm
最大转速：700转/分（4/1组织、190cm门幅）
综框间距：14mm
提综单元：12片
综丝规格：280mm
开口量：54mm-110mm 
循环纬数：12纬
产品重量：450kg
Technical parameters:
Reed space：150Cm-360cm
Max. RPM：700转/分（4/1组织、190cm门幅）
Heald frame spacing：14mm
Shedding unit：12片
Spec. of wire：280mm
Shedding amount：54mm-110mm
Weft picks：12纬
Gross weight：450kg
技术参数：Technical parameters
织机门幅：190-280 Reed space
最大转速：Max. RPM
综框间距：Heald frame spacing
提综单元：Shedding unit
综丝规格：Spec. of wire
开口量：  Shedding amount
循环纬数：Weft picks
产品重量：Gross weight

订购热线：400-138-2566

        积极式共轭凸轮开口广泛应用于喷水织机、喷气织机、剑杆织机等。可织制平纹、斜纹、缎纹等十二循环以内的织物组织，已开发147个品种，可根据不同织物的工艺要求设计停顿角。与平开口和其它多臂开口相比更适应宽幅重磅且高速、高效、省电、损耗小。

     Our positive conjugated cam shedding devices have been widely applied to various water-jet looms, air-jet looms, rapier looms and so on. They are capable of weaving plain, twist, satin as well as other fabric weaves within 12 weft picks; 147 patterns have been developed for them; stoppage angle can be designed based on respective process requirements of different fabrics. Our devices, with the advantages of fast speed, high efficiency, energy saving and low maintenance cost, are more suitable to wide and heavy fabrics compared with plain looms and other dobby shedding devices.

         NPW400C上置积极式凸轮开口在喷水织机上的应用为行业首创，拥有13项专利，独特可靠的平综方式、性价比高、年产量超万台，畅销海内外20多个国家和地区。与多家喷水织机制造商配套可替代平开口装置。

         The application of top-mounted positive cam shedding device NPW400C to water-jet loom is pioneered by us in textile industry. The device, with 13 patents and annual productivity of more than 10,000, is sold well among more than 20 countries and regions because of its unique reliable leveling mode and high cost-effectiveness. It’s used as ancillary equipment by quite a lot of water-jet loom manufacturers and it can completely replace plain shedding device.